
Howdy! My name's Dan. First, I'd like to say thank you for downloading the Kiger Mustang: Pack Three. 
I worked hard on these coats, and I hope you love them as much as I do. 

-- Info --
This pack replaces the Mustangs with the Kiger Mustang. There are three coats; 
the red dun (replaces the wild bay Mustang), the light dun (replaces the tigerstriped bay mustang) and the solid bay (replaces the grullo dun mustang).
The breed names and coat descriptions of each have been changed to match the horse files. All horses are scaled to 0.98, as the Kiger Mustang is a small breed. 

-- Instructions --

1. Download Lenny's Mod Loader (LML) and ensure that's working properly. 
2. Extract the Kiger Mustang: Pack Three using any extracion program (I use WinRar). 
3. open the 'lml' file, and copy the 'replace' and 'stream' folders. 
	Paste them into the lml located in your RDR2 Root folder. 
4. Load RDR2 and enjoy your new Kiger Mustangs! 

-- Editing --

If you'd like to edit the contents of this pack, you're more than welcome to. I'll list the instructions 
below for common changes, but the rest is up to you. 

- Editing Horse Size - 

1. Open the desired .ymt file located in the stream folder. You can open with a standard notepad program, 
but I highly recommend using Notepad++. 

2. At the top of the file, you'll see "<scale value="0.98"/>". You can change the 0.98 to any number you'd like. 

3. Save and close the notepad, then run RDR2 to reload. 

- Editing Horse Breed & Coat - 

1. Located in the "replace" folder, you'll find two files; "pedattributes.ymt" and "HorseNames.GXT2." 
Open the "HorseNames.GXT2" file with Notepad++ or an equivalent. 

2. Each horse has an individual cluster, Identify the one you'd like to change the details of. 
	I'll Edit the Buckskin American Standardbred to demonstrate: 

	<!---American Standardbred Buckskin---> 
		0x55D5B0C7 = American Standardbred
		BREED_AMERICANSTANDARDBRED_BUCKSKIN = American Standardbred - Buckskin Coat
		HORSE_BREED_AMERICANSTANDARDBRED_BUCKSKIN = American Standardbred~n~Buckskin Coat

3. Replace the breed with what you'd prefer. 
	For example if we were making the American Standardbred a Kiger Mustang, it'd look like this: 

	<!---American Standardbred Buckskin---> 	<---- NOTE: Do not change this line, it won't work!
		0x55D5B0C7 = Kiger Mustang
		BREED_AMERICANSTANDARDBRED_BUCKSKIN = Kiger Mustang - Buckskin Coat
		HORSE_BREED_AMERICANSTANDARDBRED_BUCKSKIN = Kiger Mustang~n~Buckskin Coat

4. Change the coat name in the cluster. 

	<!---American Standardbred Buckskin---> 
		0x55D5B0C7 = Kiger Mustang
		BREED_AMERICANSTANDARDBRED_BUCKSKIN = Kiger Mustang - Grullo Coat
		HORSE_BREED_AMERICANSTANDARDBRED_BUCKSKIN = Kiger Mustang~n~Grullo Coat

5. At the bottom of the page is a list of coat colors. This must also be changed in order for the new coat name to show up. 

		COAT_BUCKSKIN = Grullo

6. Save and close the notepad, then run RDR2 to reload.


Enjoy the new horses, and feel free to check out my other mods! 
	- Dan