ATS DRIVER EDL (HOS) & TRIP TIME PLANNING TOOL V1.0

ATS DRIVER EDL (HOS) & TRIP TIME PLANNING TOOL V1.0

The idea to create this tool came from GDC Logistics – Realistic Economy Mod from Steam workshop. It simulates real economy, prices & stuff, and has got a detailed manual on how trucking works in real life and a trip time planning ‘formula’. I used this formula to create a more automated route time planning. I also saw some people using real EDL apps for their trucking, but then, a shift in ATS would be much smaller than in real life, so I figured for myself how it would work best for me in the game. So below is an explainer of how I add more realism to ATS gameplay with this ‘tool’. I’ll split it into 2 sections for more clarity.

1. TRIP TIME PLANNING – There are 2 tabs in the excel file dedicated to route planning. 1st one explains the logic od calculation (taken from GDC mod), 2nd is where you put your route length, average speed, # of stops and other driver’s activities. These calculations allow to plan your trips better according to your Hours of Service statuses i.e. avoid delays in your deliveries, and avoid HOS violations. So what you’d do is enter values as shown on the screenshot below and it will calculate approximate time you will be needing to complete your trip (taking rest breaks, fuel stops, loading / unloading time into account)

2. ELECTRONIC DRIVER’S LOG & HOURS OF SERVICE (EDL & HOS)
This bit is set to replace ATS’s default fatigue simulation. What I do here is switch it off in the gameplay settings, but monitor my HOS via this file and game time. As you might know, driver’s shift in the US must not take more than 14hrs before 10 consecutive hrs or rest, out of which driving is allowed for only 11hrs during the shift. A driver must also take a 30min break after driven 8 consecutive hrs. Now real EDLs look different and have much more options, but I find my and ATS time much more condensed to follow all of US regulations. So I just mark my shift start time, drive start time (after I’ve started my shift and made pretrip inspection, etc.), do a break after 8hrs of consecutive driving and make sure I shut down before the 14hrs clock runs out. I love this bit of the simulation, because it shows how trucking is not just about driving, but about safety also. So to make it work you just need to ‘log’ your hours like shown on a screenshot below. Note that the times must be entered in decimal format – e.g. 7hrs 15 minutes in decimals would be 7,25.

Credits:

Aegle

Download mod

File File size
xls ATS_trip_time_planner 241 KB
Share mod:

Leave a Reply

Your email address will not be published. Required fields are marked *